An industrial kitchen with electrical sockets hanging from the ceiling

Let's get your electronics legally compliant.

We offer professional electrical test and tag services for restaurants, caterers and factories in Darwin and the Northern Territory.

What are my workplace duties?*

*not legal advice - check with your lawyer

In the Northern Territory, if you're responsible for your workplace health & safety, the WHS Regulations (150 & 151) state that you need make sure your electrical equipment gets:

  • Inspected for damage before being used (if it's new)
    Maximum fine for failure: $18,000
  • Regularly inspected and tested "by a competent person" if it is:
    • powered from an electrical power socket and,
    • used somewhere where it's more likely to become damaged and its life span could become shorter
    Maximum fine for failure: $18,000
  • Tagged / documented
    • You need to keep accurate records of each and every legally required test:
      • until the next test or,
      • until the equipment is thrown out
    Maximum fine for failure: $6,000
  • Withdrawn from use if it's used and untested
    Maximum fine for failure: $18,000
SafeNT tagged industrial power cables in a fast-paced fast-food restaurant kitchen

When the buck stops with you, get a professional.

In your workplace, electrical equipment is more likely to become damaged — factories and kitchens in particular are more likely to have moisture near to electrical equipment, which means there's a higher risk of serious danger.

We can help. Our team are experienced in carrying out risk assessments, electrical testing and physical tagging — to make sure you're safe, compliant and on top of your legal obligations.

Speak to our team to find out how you can minimise electrical risks in your organisation.

Get a free, no obligation quote.

One of our specialists testing the electrical resistance of an electrical power board

Getting your workplace safe: you need the highest standards.

We strictly follow the Australia/New Zealand Standard 3760:2010. It's the 42 page document which defines the specifications for proper electronic testing. Our experienced engineers have a process to make sure your electricals are compliant to the 3760:2010 standard — so your company is safe.

If any piece of equipment fails our rigorous examination, it'll be immediately tagged and flagged - to make sure the risk is contained.

Keeping your people safe:
Our 5 Step Process

We've developed a stringent 5 step process which all our engineers follow - to make sure your school's electronics are reliable. We will only certify an electronic item once it's gone through each stage of the process.

  1. Check & Inspect

We make sure there are no obvious faults with the equipment. This helps flags potentially hazardous problems early on.

Deep Test

We'll put each item through thorough testing in our mobile state-of-the-art test station to validate and ensure safety


Equipment which passes our tests will be physically labelled with the details required by law. If equipment fails any test, it'll be immediately marked with a hazard warning tag - and we'll take a photo which will be provided in the concise report

Data Transfer & Record Keeping

We'll securely upload your data to our central computer database. This gives you the peace of mind of having an off-site copy of all your electronic testing reports - so you're going beyond your legal obligations.


We'll give you a precise report into the state of each item for your records. You'll get specific test details for each item, along with descriptions, timestamps, locations, test results and next test dates - meaning you'll have an exact record of each electronic item under your control. Finally, we'll provide you a framed certificate of AS 3760 compliance.

Call us today - you're in SafeNT hands.

SafeNT: Your electrical compliance solution partner.

Contact our team today